geoprimsField-grade geospatial math

How a sextant sight becomes a line of position

The three steps from a sextant reading to a plotted line, what each correction is for, and why the clock matters more than the sextant.

For mariners · updated 2026-10-28

Planning and education aid. Not for primary navigation. Full disclaimer

A sextant does not measure where you are. It measures how high a body is above the horizon, and that single number puts you somewhere on a circle drawn on the Earth. Sight reduction is the arithmetic that turns the reading into a line you can draw on a chart.

What one sight actually tells you

Every body in the sky is directly over one point on the Earth at any instant: its geographic position. If you measure the body 40° above the horizon, you are 50° of arc away from that point, in some direction. That puts you on a circle centred on the geographic position, with a radius of 50° of arc. One sight, one circle.

The circle is far too big to draw. So a navigator draws the short piece of it that passes nearby, and over the few miles that matter, a straight line is close enough. Getting from the sextant reading to that line is three steps.

Step one: what the sky was doing

The almanac gives the body’s place for the second of the sight: its Greenwich hour angle, which is how far west of Greenwich it stood, and its declination, which is how far north or south of the equator. Those two numbers are its geographic position.

This is where the clock comes in, and it is the part people underestimate. The sky turns 15° of hour angle every hour, which is 15 minutes of arc every minute of time. A clock a minute fast moves your line about 15 nautical miles. A sextant read carelessly to the nearest two minutes of arc costs you two miles. The watch is the instrument that decides the quality of the sight.

Step two: from the arc to the observed altitude

What you read off the sextant’s arc is not the altitude of the body’s centre above the true horizon. Five things stand between them, and the correction tool shows each one on its own line.

Below about 5° of altitude refraction grows fast and becomes unpredictable, which is why Bowditch advises against sights that low. The tool says so when you give it one.

Step three: the intercept

Now you have the observed altitude, Ho. Pick a position you think you are near, usually the dead-reckoning position, and work out what altitude a body at that hour angle and declination would have there. That is the computed altitude, Hc, and it comes straight out of the navigational triangle.

The difference is the whole trick. If Ho is greater than Hc, you are closer to the body’s geographic position than your assumed position is, by one nautical mile for every minute of arc of difference. If Ho is less, you are further away. That difference is the intercept, and the direction to move is the body’s azimuth, which the same triangle gives.

So: start at the assumed position, go the intercept’s distance along the azimuth toward the body (or along its reciprocal, away), and draw a line square to the azimuth through that point. You are somewhere on that line.

Why it is a line and not a fix

One sight gives one line. Two or three sights of different bodies, taken within a few minutes of each other, give lines that cross, and the crossing is a fix. Sights taken an hour apart need the earlier lines advanced for the run between them, which is the running fix.

The method has a limit worth knowing. Replacing the circle with its tangent is an approximation, and it gets worse as the altitude rises, because a high body’s circle is small and curves sharply. Above about 70° Bowditch advises working from the dead-reckoning position and keeping the line short, or plotting the circle itself.

What these tools do and do not do

The tools here compute the body’s place from published astronomical series rather than reading tabulated pages, so they are not limited to one year’s almanac. They are checked against the US Naval Observatory’s own data and against Bowditch’s worked examples, and the agreement is stated on each tool’s page.

They are a planning and teaching aid. The printed almanac and the published sight reduction tables govern, and nothing here is a substitute for knowing how to work a sight by hand when the batteries die.

Try it: Sight reduction by the intercept method

The calculator below is the real tool, running its worked example. Change any value; nothing leaves your device.

the Spica line of position lies 2.9 NM toward the assumed position, square to azimuth 75.4degrees

the Spica line of position lies 2.9 NM toward the assumed position, square to azimuth 75.4 degrees.

Line of position
LineLatitudeLongitude
1-41.471818 deg128.540894 deg
1-40.503611 deg128.207621 deg
Intercept
Toward or away
Computed altitude
True azimuth
Azimuth angle
Azimuth angle written out
Provenance
Computed by
navigation.celestial.sight-reduction 1.0.0, core 0.1.0
Model
The body's apparent place from the same series as the almanac tool; LHA = GHA + assumed longitude east; Hc = asin(sin L sin d + cos L cos d cos LHA) and Zn = atan2(-cos d sin LHA, cos L sin d - sin L cos d cos LHA) (Bowditch Appendix B); the intercept Ho - Hc in minutes of arc read as nautical miles, toward the body when Ho is the greater; the line drawn square to Zn through the point that far from the assumed position
Accuracy
Within 0.012′ in computed altitude and 0.001° in azimuth of the US Naval Observatory's celestial-navigation data at 148 body-instants and places from 1995 to 2045, the Moon within 0.11′ and Venus within 0.19′ where USNO itself departs from JPL; within 0.2′ and 0.1° of Bowditch's own worked star fix, whose tabulated inputs are each rounded to a tenth of a minute
Reference data
version IERS Bulletin C 72 (2026-07-06) of a reference dataset
Notes
None
Cites
National Geospatial-Intelligence Agency, The American Practical Navigator (Bowditch), NGA Pub. No. 9, Volume I; International Earth Rotation and Reference Systems Service (Petit and Luzum, eds.), IERS Conventions (2010), IERS Technical Note 36, Chapter 5; Bureau des Longitudes (now IMCCE), distributed by CDS Strasbourg, VSOP87 planetary theories (Bretagnon and Francou 1988), VizieR catalog VI/81; Bureau des Longitudes (now IMCCE), distributed by CDS Strasbourg, ELP 2000-82B lunar solution (Chapront-Touze and Chapront 1983, 1988), VizieR catalog VI/79; European Space Agency (F. van Leeuwen, Astronomy and Astrophysics 474, 653), Hipparcos, the new reduction (van Leeuwen 2007), VizieR catalog I/311; US Naval Observatory, Astronomical Applications Department, USNO Astronomical Applications API (celestial navigation and sidereal time)

Open the full tool, with your values →

Your values

Showing an example. Change anything.
More options 2

Tools for this

Sources

Every number on this page comes from the tools above, which cite their sources on their own pages under "How we got this." Found a mistake? Use "Report a problem" at the bottom of the page.