Points every set distance along a line
Points at a fixed interval along a line, from a start offset, measured on the UTM plane as GIS tools do, with the line's plane and geodesic lengths side by side.
Experimental: not yet fully verified. How results are checked
4 points along a line of 99.891 m on the plane (99.931 m on the ground).
| Distance along | Latitude | Longitude |
|---|---|---|
| 0.000 m | 40.0000000 deg | -105.0000000 deg |
| 30.000 m | 40.0002703 deg | -105.0000000 deg |
| 60.000 m | 40.0005406 deg | -105.0000000 deg |
| 90.000 m | 40.0008109 deg | -105.0000000 deg |
- Plane length
- Ground length
- Plane
Provenance
- Computed by
- geometry.sampling.points-along-line 1.0.0, core 0.1.0
- Model
- The line carried to its UTM zone's plane; points at start + i × interval of plane length, kept while within the line (QGIS Points along geometry); geodesic length from Karney's inverse on each segment
- Accuracy
- Exact along the plane line; the plane and ground lengths differ by the zone's scale, shown side by side
- Notes
- 1 shown with the answer
- Cites
- QGIS project (vendor documentation), QGIS Processing algorithm: Points along geometry; Karney, C. F. F., Journal of Geodesy, Algorithms for geodesics (area of geodesic polygons, section 6)
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: The line carried to its UTM zone's plane; points at start + i × interval of plane length, kept while within the line (QGIS Points along geometry); geodesic length from Karney's inverse on each segment
Show your work
Line length
sum of segment lengths on the UTM plane1 segments on UTM zone 13N (WGS 84); 99.931 m on the ground= 99.891 mPoints
at start + i × interval while within the line99.891 m line on the plane, every 30 m from 0 m= 4
The same steps an agent gets from the MCP server with explain: true.
Accuracy: Exact along the plane line; the plane and ground lengths differ by the zone's scale, shown side by side
When to use this: Use this to set stations or sample points every so many meters along a route, a stream, a fence, or a transect, the way GIS tools do it. The last point is kept only if it falls on the line.
Limitations: Distances are measured on the UTM plane, as GIS tools do, so they run short or long of the ground by the zone's scale (up to about 0.1%); the ground length is shown beside it. At most 100,000 points; the line may span 500 km.
Worked example: Every 30 m along a 100 m line. Source: Points at 0, 30, 60, and 90 m; none at 120 m.
You enter
- Interval
- 30 m
- Line
- 40, -105 40.0009, -105
You get
- Points
- 4
- Plane length
- 99.891 m
- Ground length
- 99.931 m
- Plane
- UTM zone 13N (WGS 84)
Review: Not yet independently reviewed by a GIS professional.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- QGIS Processing algorithm: Points along geometry, QGIS project (vendor documentation), QGIS 3.44 user manual. Vector geometry: Points along geometry (distance, start offset, end offset).
- Algorithms for geodesics (area of geodesic polygons, section 6), Karney, C. F. F., Journal of Geodesy, Vol. 87, No. 1. pp. 43-55, section 6.
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.