geoprimsField-grade geospatial math

Point scale factor in UTM

The grid scale factor at a point: how much a short distance is stretched or shrunk on the grid there, with the grid convergence.

1.00010324

The grid scale factor here is 1.00010324, in UTM zone 32.

Grid convergence
Zone
Central meridian
Provenance
Computed by
geodesy.projection.scale-factor 1.0.0, core 0.1.0
Model
Transverse Mercator, 6th-order Krüger series (Karney 2011), k0 = 0.9996, on WGS 84
Accuracy
Better than 5 nm within 3,900 km of the central meridian
Notes
None
Cites
Karney, C. F. F., Journal of Geodesy, Transverse Mercator with an accuracy of a few nanometers; National Geospatial-Intelligence Agency, The Universal Grids and the Transverse Mercator and Polar Stereographic Map Projections, NGA.SIG.0012

Something look off?

Your values

Showing an example. Change anything.
More options 3
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Transverse Mercator point scale from the Krüger series (Karney 2011), with k₀ = 0.9996 on the central meridian: grid distance = ellipsoid distance × scale factor

Accuracy: Better than 5 nm within 3,900 km of the central meridian

When to use this: Use this before comparing a distance from UTM coordinates with one measured on the ground. Enter the latitude and longitude. The tool returns the point scale factor in the standard zone, or a zone you force: 0.9996 on the central meridian, 1 about 180 km either side, and above 1 beyond that. Multiply an ellipsoid distance by it to get the grid distance.

Limitations: The factor holds at a point; over a long line use the mean of the ends and middle. It covers the projection only, so ground distances also need the elevation factor, and the two together make the combined factor. It is for UTM and differs in a State Plane zone or any other projection. Outside the standard zone the distortion grows quickly.

Worked example: Bergen, near the western edge of zone 32. Source: Krüger-series transverse Mercator on WGS 84, zone 32.

You enter

Latitude
60.3913 deg
Longitude
5.3221 deg

You get

Point scale factor
1.00010324
Grid convergence
-3.1987167°
Zone
32
Central meridian
9°

Review: Not yet independently reviewed by a geodesist.

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

UTM scale factor on the central meridian k0
0.9996 — NGA.SIG.0012 UTM and UPS

Sources

Terms

UTM: Universal Transverse Mercator
A grid of 60 zones, each 6° of longitude wide, that turns latitude and longitude into eastings and northings in meters. Source: NGA.SIG.0012 UTM and UPS

UTM — Universal Transverse Mercator

A grid of 60 zones, each 6° of longitude wide, that turns latitude and longitude into eastings and northings in meters.

Source: NGA.SIG.0012 UTM and UPS