Grid convergence in UTM
The angle between true north and grid north at a point, positive when grid north lies east of true north, with the point scale factor there.
Grid north is 0.6135091° from true north here, in UTM zone 33.
- Point scale factor
- Zone
- Central meridian
Provenance
- Computed by
- geodesy.projection.convergence 1.0.0, core 0.1.0
- Model
- Transverse Mercator, 6th-order Krüger series (Karney 2011), k0 = 0.9996, on WGS 84
- Accuracy
- Better than 5 nm within 3,900 km of the central meridian
- Notes
- None
- Cites
- Karney, C. F. F., Journal of Geodesy, Transverse Mercator with an accuracy of a few nanometers; National Geospatial-Intelligence Agency, The Universal Grids and the Transverse Mercator and Polar Stereographic Map Projections, NGA.SIG.0012
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Transverse Mercator convergence from the Krüger series (Karney 2011): close to (λ − λ₀)·sin φ for small longitude differences; true azimuth = grid azimuth + convergence
Accuracy: Better than 5 nm within 3,900 km of the central meridian
When to use this: Use this to turn a grid bearing measured on a UTM map or computed from UTM coordinates into a true bearing, or the other way round. Enter the latitude and longitude. The tool returns the convergence in the point's standard zone, or in a zone you force. Add it to a grid azimuth to get the true azimuth; subtract it to go from true to grid.
Limitations: The convergence is for UTM, a transverse Mercator projection with six-degree zones, and differs in a State Plane zone or any other projection. It is zero on the zone's central meridian and grows toward the zone edges and the poles. It is the angle at a point, so a long line also needs the arc-to-chord correction. Magnetic north is a separate correction.
Worked example: Longyearbyen, far from its central meridian. Source: Krüger-series transverse Mercator on WGS 84, zone 33.
You enter
- Latitude
- 78.2232 deg
- Longitude
- 15.6267 deg
You get
- Grid convergence
- 0.6135091°
- Point scale factor
- 0.999602492
- Zone
- 33
- Central meridian
- 15°
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: Ten focused geodesy operations are now stable: degree lengths and meridian arcs (held to GeographicLib), the MGRS grid-zone lookup and reference precision (NGA's GeoTrans), both directions of the height conversion (GeographicLib's GeoidEval), the WMM and IGRF comparison and the compass reliability zone (pygeomag and ppigrf), and UTM convergence and scale factor (GeographicLib's exact transverse Mercator). A new invariants test checks each note's stated properties. Results are unchanged. Changelog
Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Transverse Mercator with an accuracy of a few nanometers, Karney, C. F. F., Journal of Geodesy, Vol. 85, No. 8. pp. 475-485 (6th-order Krüger series).
- The Universal Grids and the Transverse Mercator and Polar Stereographic Map Projections, NGA.SIG.0012, National Geospatial-Intelligence Agency, NGA.SIG.0012_2.0.0_UTMUPS. Sections 3 (UTM zones, Norway and Svalbard exceptions) and 4 (UPS).
Terms
- UTM: Universal Transverse Mercator
- A grid of 60 zones, each 6° of longitude wide, that turns latitude and longitude into eastings and northings in meters. Source: NGA.SIG.0012 UTM and UPS
UTM — Universal Transverse Mercator
A grid of 60 zones, each 6° of longitude wide, that turns latitude and longitude into eastings and northings in meters.
Source: NGA.SIG.0012 UTM and UPS