GDA94 and GDA2020
Transforms an Australian position between and by ICSM's conformal transformation, which moves the country about 1.8 m north-east, and says what it does not model.
Experimental: not yet fully verified. How results are checked
That point moves 1.744 m to the 29.1°.
- This is the conformal transformation, which carries the whole country as one rigid piece. It does not model GDA94's own distortion, which is up to about 0.1 m in places; ICSM publishes a second grid (EPSG 8447) for that.
- Longitude
- Ellipsoidal height
- How far the point moved
- Which way it moved
- What was applied
Provenance
- Computed by
- geodesy.datum.gda2020 1.0.0, core 0.1.0
- Model
- ICSM's conformal transformation as EPSG operation 8048 registers it: geographic → ECEF on GRS 80 → seven-parameter Helmert in the coordinate-frame convention (translations 0.06155, −0.01087, −0.04019 m; rotations −0.0394924, −0.0327221, −0.0328979 arc-seconds; scale −0.009994 ppm) → back to geographic. The reverse is the exact inverse rather than the negated parameters
- Accuracy
- EPSG states operation 8048 at 0.01 m, and it agrees with PROJ applying the same operation to a nanodegree. What that figure does not cover is GDA94's own distortion, which the conformal-plus-distortion grid carries instead
- Notes
- 2 shown with the answer
- Cites
- IOGP, from the Intergovernmental Committee on Surveying and Mapping (ICSM), EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry); International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: ICSM's conformal transformation as EPSG operation 8048 registers it: geographic → ECEF on GRS 80 → seven-parameter Helmert in the coordinate-frame convention (translations 0.06155, −0.01087, −0.04019 m; rotations −0.0394924, −0.0327221, −0.0328979 arc-seconds; scale −0.009994 ppm) → back to geographic. The reverse is the exact inverse rather than the negated parameters
Show your work
Onto the ellipsoid's axes
geographic to earth-centred Cartesian on GRS 80-23.670124000°, 133.885513000°, 603.3466 m= X, Y, ZThe conformal motion
seven parameters, coordinate-frame convention (EPSG 8048)0.06155, −0.01087, −0.04019 m; −0.0394924, −0.0327221, −0.0328979″; −0.009994 ppm= -23.670110244°
The same steps an agent gets from the MCP server with explain: true.
Accuracy: EPSG states operation 8048 at 0.01 m, and it agrees with PROJ applying the same operation to a nanodegree. What that figure does not cover is GDA94's own distortion, which the conformal-plus-distortion grid carries instead
When to use this: Use this to move an Australian position between GDA94 and GDA2020, the datums behind MGA94 and MGA2020 coordinates. The two differ by about 1.8 m to the north-east, which is the plate's motion between the two epochs, so a GDA94 coordinate read as GDA2020 is out by about a car's length. For a single point, or a set small enough to treat as rigid, the conformal transformation is the one ICSM publishes.
Limitations: This is the conformal transformation: one rigid motion for the whole continent. It does not model the distortion in GDA94's own network, up to about 0.1 m in places, which ICSM's second grid (EPSG 8447) carries and which matters for cadastral work; the result says so. The transformation has a published area of use, Australia and its offshore territories, and the answer is flagged outside it. Heights are ellipsoidal and carried through the same rigid motion; AHD heights are a separate step, by AUSGeoid2020.
Worked example: Alice Springs (ALIC), GDA94 to GDA2020. Source: PROJ 9.9.0 applying EPSG operation 8048 to the ALIC station coordinates of the change's own scenario: the point moves about 1.8 m to the north-east. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Direction
- to-gda2020
- Ellipsoidal height
- 603.3466 m
- Latitude
- -23.670124 deg
- Longitude
- 133.885513 deg
You get
- Latitude
- -23.670110244°
- Longitude
- 133.885521319°
- Ellipsoidal height
- 603.2489 m
- How far the point moved
- 1.744 m
- Which way it moved
- 29.1°
- What was applied
- GDA94 to GDA2020 by EPSG operation 8048, ICSM's conformal transformation. It does not model GDA94's own distortion.
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-07, added: A new tool moves an Australian position between GDA94 and GDA2020, the datums behind MGA94 and MGA2020 coordinates. The two differ by about a car's length: the plate carried the country between 1.49 metres in the south-east and 1.80 in the north, always to the north-east, so a GDA94 coordinate read as GDA2020 is wrong by that much. The tool applies the conformal transformation ICSM publishes, and says plainly what that leaves out: the distortion in GDA94's own network, up to about a tenth of a metre in places, which ICSM's second grid carries and which matters for cadastral work. Outside the area the transformation is published for, the answer still comes, flagged as extrapolation. Changelog
Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry), IOGP, from the Intergovernmental Committee on Surveying and Mapping (ICSM), v13.102, as shipped in PROJ 9.9.0. Operation 8048, GDA94 to GDA2020 (1): ICSM's conformal transformation as seven parameters, coordinate-frame convention, stated at 0.01 m; and operations 8446 and 8447, the conformal and the conformal-plus-distortion grids. Read free.
- Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2, International Association of Oil & Gas Producers (IOGP), Revised September 2019. §4.2.3 Helmert 7-parameter and §4.2.5 time-dependent transformations (EPSG methods 1032, 1033, 1053, 1056).
Terms
- GDA2020: Geocentric Datum of Australia 2020
- Australia's datum, fixed to the continent where it sat in 2020, about 1.8 m north-east of where GDA94 put it. Source: EPSG Geodetic Parameter Dataset for the curated CRS registry
- GDA94: Geocentric Datum of Australia 1994
- Australia's earlier datum, fixed to the continent as it sat in 1994; still behind a great deal of published mapping. Source: EPSG Geodetic Parameter Dataset for the curated CRS registry
- GRS: Geodetic Reference System
- An Earth ellipsoid defined by the IUGG. GRS 80 underlies NAD 83 and is almost identical to WGS 84. Source: Geodetic Reference System 1980
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.
GDA2020 — Geocentric Datum of Australia 2020
Australia's datum, fixed to the continent where it sat in 2020, about 1.8 m north-east of where GDA94 put it.
Source: EPSG Geodetic Parameter Dataset for the curated CRS registry
GDA94 — Geocentric Datum of Australia 1994
Australia's earlier datum, fixed to the continent as it sat in 1994; still behind a great deal of published mapping.
Source: EPSG Geodetic Parameter Dataset for the curated CRS registry