ITRF or WGS 84 to ETRS89
Carries a position between a global frame ( or 84) and , the European frame national grids are built on, which is fixed to the plate and so drifts from the global frames by about 2.5 cm a year.
Experimental: not yet fully verified. How results are checked
That point moves 0.8382 m.
- Longitude
- Ellipsoidal height
- How far the point moved
- Which way it moved
- What was applied
Provenance
- Computed by
- geodesy.datum.etrf 1.0.0, core 0.1.0
- Model
- The frame given is carried to ITRF2014 by the IERS parameters the neighbouring ITRF tool uses, then to ETRF2000 by EPSG's ITRF2014 to ETRF2000 (1): a time-dependent position-vector transformation (EPSG method 1053) with its reference epoch of 2010.0, so the rotation rates that hold ETRS89 to the Eurasian plate are applied over the years from 2010 to the coordinates' epoch. The reverse runs the same chain backwards
- Accuracy
- EPSG states the tie at 0.01 m, and it agrees with PROJ applying the same operation to a nanodegree. The ITRF-to-ITRF leg adds the few millimetres the IERS parameters carry
- Notes
- 1 shown with the answer
- Cites
- IOGP, from the EUREF Technical Working Group, EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry); International Association of Oil & Gas Producers (IOGP), Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: The frame given is carried to ITRF2014 by the IERS parameters the neighbouring ITRF tool uses, then to ETRF2000 by EPSG's ITRF2014 to ETRF2000 (1): a time-dependent position-vector transformation (EPSG method 1053) with its reference epoch of 2010.0, so the rotation rates that hold ETRS89 to the Eurasian plate are applied over the years from 2010 to the coordinates' epoch. The reverse runs the same chain backwards
Show your work
Onto ITRF2014
the IERS tie the neighbouring ITRF tool usesITRF2020 at 2026.00= ITRF2014Onto ETRS89
EPSG's ITRF2014 to ETRF2000 (1), time-dependent, reference epoch 2010.016.00 years of plate rotation= 53.349800018°
The same steps an agent gets from the MCP server with explain: true.
Accuracy: EPSG states the tie at 0.01 m, and it agrees with PROJ applying the same operation to a nanodegree. The ITRF-to-ITRF leg adds the few millimetres the IERS parameters carry
When to use this: Use this when a satellite position has to meet a European national grid. ETRS89 is fixed to the Eurasian plate and the global frames are not, so the two drift apart by about 2.5 cm a year: a position taken today on WGS 84 is most of a metre from the ETRS89 the grid is built on. Give the coordinates' epoch, which is the date they were measured, not today's date.
Limitations: ETRS89 is a European frame: EPSG publishes this tie for roughly 16°W to 33°E and 33°N to 84°N, and outside it the answer is flagged. ETRF2000 is the realization the EUREF Technical Working Group recommends; ETRF2014 and ETRF2020 exist and are technically better, and a national grid tied to one of those is a different step. This is a rigid transformation of the whole plate and knows nothing of local deformation. Heights are ellipsoidal, and a national height datum is its own step.
Worked example: A Dublin position on WGS 84 today, onto ETRS89. Source: PROJ 9.9.0 applying EPSG's ITRF2014 to ETRF2000 (1) after the IERS tie from ITRF2020: the point moves about 0.7 m, which is the plate's motion since 1989 as the frames record it. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Direction
- to-etrs89
- Coordinate epoch
- 2026.0
- Global frame
- ITRF2020
- Ellipsoidal height
- 85 m
- Latitude
- 53.349806 deg
- Longitude
- -6.260247 deg
You get
- Latitude
- 53.349800018°
- Longitude
- -6.260254649°
- Ellipsoidal height
- 84.9685 m
- How far the point moved
- 0.8382 m
- Which way it moved
- 217.4°
- What was applied
- Carried to ITRF2014 by the IERS parameters, then to ETRF2000 by EPSG's time-dependent tie at reference epoch 2010.0.
Review: Not yet independently reviewed by a geodesist.
Last verified: 2026-09-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-07, added: A new tool carries a position between the global frames a satellite works in and ETRS89, which every European national grid is built on. The two drift apart, because ETRS89 is pinned to the European plate as it sat in 1989 and the plate has been moving since: measured at Dublin, a position is 0.48 m from ETRS89 at epoch 2010 and 0.84 m at 2026, running south-west. That is why the tool asks when the coordinates were measured rather than assuming today, and why the Irish and Swiss grid tools say a satellite position is a step away from the grid they are defined on: this is that step. Changelog
Checked against: 26 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- EPSG Geodetic Parameter Dataset (EPSG v13.102 CRS registry), IOGP, from the EUREF Technical Working Group, v13.102, as shipped in PROJ 9.9.0. ITRF2014 to ETRF2000 (1), EPSG method 1053 (time-dependent Position Vector, geocentric) at reference epoch 2010.0, stated at 0.01 m; and the remark on ETRF2000 that the EUREF Technical Working Group recommended it as the realization of ETRS89. Read free.
- Coordinate Conversions and Transformations including Formulas, IOGP Publication 373-7-2, International Association of Oil & Gas Producers (IOGP), Revised September 2019. §4.2.3 Helmert 7-parameter and §4.2.5 time-dependent transformations (EPSG methods 1032, 1033, 1053, 1056).
Terms
- ETRS89: European Terrestrial Reference System 1989
- The reference system European national grids are built on, fixed to the European plate, so it does not drift with it as ITRF and WGS 84 do. Source: EPSG Geodetic Parameter Dataset for the curated CRS registry
- GRS: Geodetic Reference System
- An Earth ellipsoid defined by the IUGG. GRS 80 underlies NAD 83 and is almost identical to WGS 84. Source: Geodetic Reference System 1980
- ITRF: International Terrestrial Reference Frame
- The global scientific reference frame, realized from thousands of stations whose motions it models. ITRF2020 is current. Source: ITRF2020 transformation parameters to past ITRFs
- WGS: World Geodetic System
- The US Department of Defense global reference frame and ellipsoid that GPS uses; the current version is WGS 84. Source: Department of Defense World Geodetic System 1984
Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.
ETRS89 — European Terrestrial Reference System 1989
The reference system European national grids are built on, fixed to the European plate, so it does not drift with it as ITRF and WGS 84 do.
Source: EPSG Geodetic Parameter Dataset for the curated CRS registry
ITRF — International Terrestrial Reference Frame
The global scientific reference frame, realized from thousands of stations whose motions it models. ITRF2020 is current.
Source: ITRF2020 transformation parameters to past ITRFs
WGS — World Geodetic System
The US Department of Defense global reference frame and ellipsoid that GPS uses; the current version is WGS 84.
Source: Department of Defense World Geodetic System 1984