Flight path statistics
The length of a waypoint path, its legs and turns, how far it goes from the first waypoint, and the flight time at a groundspeed.
Planning and education aid. Not for primary navigation. Full disclaimer
The path is 1 km long in 4 legs, with 3 turns.
- Legs
- Turns
- Longest leg
- Farthest from the first waypoint
- Total turning
- Flight time
Provenance
- Computed by
- drone.mission.pattern-stats 1.0.0, core 0.1.0
- Model
- Each leg is the geodesic between consecutive waypoints on WGS 84 (Karney 2013); the course change at a waypoint is the departure azimuth of the next leg less the arrival azimuth of the last, and counts as a turn past 5°
- Accuracy
- Leg lengths to nanometers on the ellipsoid; the flight time is a planning figure at one steady groundspeed
- Notes
- None
- Cites
- Karney, C. F. F., Journal of Geodesy, Algorithms for geodesics
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Each leg is the geodesic between consecutive waypoints on WGS 84 (Karney 2013); the course change at a waypoint is the departure azimuth of the next leg less the arrival azimuth of the last, and counts as a turn past 5°
Accuracy: Leg lengths to nanometers on the ellipsoid; the flight time is a planning figure at one steady groundspeed
When to use this: Use this to size up a mission you already have as a list of waypoints, from a flight app, a spreadsheet, or one of the pattern tools here. Enter the waypoints in the order flown. The tool returns the total path length, the number of legs and turns, the longest leg, and how far the path gets from its first waypoint, which matters for visual line of sight. Add a groundspeed for the flight time.
Limitations: The path is straight legs over the ground between waypoints, so climbs, descents, curved turns, and hovering to take a photo are not counted, and the flight time comes out short for a pattern with many turns. The first waypoint stands in for where the pilot is, so add the takeoff point first if it is somewhere else. It does not check terrain, airspace, or a geofence.
Worked example: A four-leg box flown at 8 m/s. Source: Geodesic leg lengths from GeographicLib's GeodSolve. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Groundspeed
- 8 m/s
- Waypoints
- 44.98, -93.27 44.9818, -93.27 44.9818, -93.2662 44.98, -93.2662 44.98, -93.27
You get
- Path length
- 1 km
- Legs
- 4
- Turns
- 3
- Longest leg
- 299.7 m
- Farthest from the first waypoint
- 360.3 m
- Total turning
- 270°
- Flight time
- 2.1 min
Review: Not yet independently reviewed by a Part 107 remote pilot.
Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-10-14, changed: The elevation factor, grid-to-ground, and ground-to-grid conversions, each reproducing NGS Manual 5's Section 4.4 example, and mission pattern statistics, held to GeographicLib's GeodSolve, are now stable. Each has 23 vectors and named invariant tests. Results are unchanged. Changelog
Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Constants this tool assumes
Values you do not enter, and where each comes from.
- WGS 84 semi-major axis
6378137 m— Department of Defense World Geodetic System 1984- WGS 84 inverse flattening
298.257223563— Department of Defense World Geodetic System 1984
Sources
- Algorithms for geodesics, Karney, C. F. F., Journal of Geodesy, Vol. 87, No. 1. pp. 43-55 (direct and inverse geodesic problems).