geoprimsField-grade geospatial math

Tire hydroplaning speed

The groundspeed at which a tire starts to hydroplane on a flooded runway, from the tire pressure: 9 × √pressure knots ( TN D-2056), with the airplane handbook's 8.6 × √pressure as an option.

Planning and education aid. Not for primary navigation. Full disclaimer

54kt

The tires can hydroplane from about 54 kt groundspeed.

NASA, 9 √p
Handbook, 8.6 √p
Provenance
Computed by
aviation.performance.hydroplaning-speed 1.0.0, core 0.1.0
Model
V_P = 9 √p knots, p in psi (NASA TN D-2056 eq. 4), or 8.6 √p (Airplane Flying Handbook); valid for 24 to 150 psi
Accuracy
The report found reasonable agreement with tests on tires from 925 to 22,000 lb load and 24 to 150 psi; it is an estimate, not a guarantee
Notes
None
Cites
Horne, W. B., and Dreher, R. C., NASA Langley Research Center, NASA TN D-2056, Phenomena of Pneumatic Tire Hydroplaning

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: V_P = 9 √p knots, p in psi (NASA TN D-2056 eq. 4), or 8.6 √p (Airplane Flying Handbook); valid for 24 to 150 psi

Accuracy: The report found reasonable agreement with tests on tires from 925 to 22,000 lb load and 24 to 150 psi; it is an estimate, not a guarantee

When to use this: Use this to know the speed above which a tire can ride up on standing water and lose braking and steering, before landing or taking off on a wet runway. Enter the tire's inflation pressure; the answer is a groundspeed.

Limitations: The formula holds for smooth and closed-pattern treads, and for rib treads only where the water is deeper than the tread grooves; it ignores tread wear, water viscosity, and runway texture. It was correlated for 24 to 150 psi, and values outside that range are refused. Once a tire is hydroplaning it can keep doing so below this speed, so slow down well before it.

Worked example: A 36 psi main tire. Source: NASA TN D-2056 eq. 4: 9 × √36 = 54 kt. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Tire pressure
36 psi

You get

Hydroplaning speed
54 kt
NASA, 9 √p
54 kt
Handbook, 8.6 √p
51.6 kt

Review: Not yet independently reviewed by a flight instructor (CFI).

Last verified: 2026-10-19, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 21 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Terms

NASA: National Aeronautics and Space Administration
The US government agency for aeronautics and space research, whose Langley center measured how and when aircraft tires hydroplane. Source: NASA TN D-2056, Phenomena of Pneumatic Tire Hydroplaning

NASA — National Aeronautics and Space Administration

The US government agency for aeronautics and space research, whose Langley center measured how and when aircraft tires hydroplane.

Source: NASA TN D-2056, Phenomena of Pneumatic Tire Hydroplaning