Climb requirement check
Whether your rate of climb meets a departure's required gradient at your groundspeed: the rate you need, the gradient you can make, and the margin, with the gradient worked from an altitude and distance when the chart gives those.
Planning and education aid. Not for primary navigation. Full disclaimer
You need 891 ft/min to climb 297 ft/NM at 180 kt.
- Required gradient
- Groundspeed
- Gradient you can make
- Margin
Provenance
- Computed by
- aviation.performance.climb-requirement 1.0.0, core 0.1.0
- Model
- Rate needed = gradient (ft/NM) × groundspeed (kt) / 60; gradient made = rate × 60 / groundspeed; gradient = (altitude − start) / distance; groundspeed = true airspeed − headwind (IPH ch. 1)
- Accuracy
- Exact for a steady climb at a constant groundspeed; your flight manual's climb rate at today's weight, altitude, and temperature decides the margin
- Notes
- None
- Cites
- Federal Aviation Administration, Instrument Procedures Handbook, FAA-H-8083-16B
Something look off?
How we got thisFormula, worked example, sources, and proof
Model: Rate needed = gradient (ft/NM) × groundspeed (kt) / 60; gradient made = rate × 60 / groundspeed; gradient = (altitude − start) / distance; groundspeed = true airspeed − headwind (IPH ch. 1)
Accuracy: Exact for a steady climb at a constant groundspeed; your flight manual's climb rate at today's weight, altitude, and temperature decides the margin
When to use this: Use this before accepting a departure procedure or obstacle departure with a climb gradient above the standard 200 ft per nautical mile: enter the gradient (or the altitude to reach and the distance), your climb groundspeed, and the rate of climb your flight manual gives for today. It shows the rate you need, the gradient you can make, and the margin.
Limitations: It checks one steady climb at one groundspeed. Your real climb rate falls with altitude, heat, and weight, and a tailwind raises the rate you need, so use the flight manual's numbers for the conditions and a conservative wind. The standard 200 ft per nautical mile assumes crossing the departure end of the runway at 35 ft or more; the procedure as published governs.
Worked example: 297 ft/NM at 180 kt with a 1,000 fpm climb. Source: add-aviation-practical-additions design A7: 297 ft/NM at 180 kt needs 891 fpm. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.
You enter
- Required gradient
- 297 ft/NM
- Groundspeed
- 180 kt
- Your rate of climb
- 1000 ft/min
You get
- Rate of climb needed
- 891 ft/min
- Required gradient
- 297 ft/NM
- Groundspeed
- 180 kt
- Gradient you can make
- 333 ft/NM
- Margin
- 109 ft/min
Review: Not yet independently reviewed by a flight instructor (CFI).
Last verified: 2026-10-20, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.
Status: version 1.0.0, core 0.1.0. See this tool in the verification report.
Changes
- 2026-11-06, changed: Thirteen tools are now marked stable rather than experimental: cabin altitude, approach category, circling radius, RVR to visibility, fuel density with temperature, climb requirement, hydroplaning speed, supplemental oxygen, time of useful consciousness, parallax height, photo scale, relief displacement, and sidereal time. Nothing they compute changed. Stable means each one now carries what the verification bar asks for: a derivation note with its equations and domain, a worked example taken from a published source rather than from our own arithmetic, an invariants test, at least twenty golden vectors, and a page that says when to reach for the tool and where its answer stops. The pages drop the experimental warning, and the tools join their MCP toolsets, so an agent can call them by name. Changelog
Checked against: 20 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.
Sources
- Instrument Procedures Handbook, FAA-H-8083-16B, Federal Aviation Administration, FAA-H-8083-16B. Chapter 1, Figure 1-17 (2.8° at 180 kt requires 892 ft/min).