geoprimsField-grade geospatial math

Converted meteorological visibility

The converted meteorological visibility () that stands in for an unavailable RVR under EASA rules: the reported visibility times 1.0, 1.5, or 2.0 by the lights in operation and day or night, from AMC10 CAT.OP.MPA.110 Table 16.

Planning and education aid. Not for primary navigation. Full disclaimer

Experimental: not yet fully verified. How results are checked

3,000m

The CMV is 3,000 m. That is the reported value times 2.

Factor
When it applies
Rules as of
Provenance
Computed by
aviation.ifr.visibility-to-cmv 1.0.0, core 0.1.0
Model
CMV = reported visibility × factor: AMC10 CAT.OP.MPA.110 Table 16 (high-intensity approach and runway lights 1.5 day, 2.0 night; other lights 1.0 day, 1.5 night; no lights 1.0 day, not applicable at night), or 1.0 for flight planning; not for take-off minima or to continue an approach in LVOs
Accuracy
Exact to the AMC's table as of the review date
Notes
1 shown with the answer
Cites
European Union Aviation Safety Agency, Easy Access Rules for Air Operations, AMC10 CAT.OP.MPA.110, Conversion of visibility to CMV

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: CMV = reported visibility × factor: AMC10 CAT.OP.MPA.110 Table 16 (high-intensity approach and runway lights 1.5 day, 2.0 night; other lights 1.0 day, 1.5 night; no lights 1.0 day, not applicable at night), or 1.0 for flight planning; not for take-off minima or to continue an approach in LVOs

Accuracy: Exact to the AMC's table as of the review date

When to use this: Use this under EASA rules when the runway's RVR is not reported and you need the value that stands in for it: enter the reported visibility, the lights in use, and whether it is day or night. It returns the CMV to compare with the approach's RVR minimum. For flight planning it uses a factor of 1.0, as the AMC says.

Limitations: It quotes the EASA acceptable means of compliance for commercial air transport by aeroplane; your operator's approved procedures govern. The conversion is not allowed for take-off minima or to continue an approach in low-visibility operations, and at night with no lights the table gives no factor; the tool refuses all three. It is not the US rule, which converts the other way, from RVR to visibility. A dated reference, not legal advice.

Worked example: 1,500 m at night with high-intensity lights. Source: AMC10 CAT.OP.MPA.110 Table 16: 1,500 m × 2.0 = 3,000 m. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Lights in operation
hi
Day or night
night
Reported visibility
1500 m

You get

Converted visibility (CMV)
3,000 m
Factor
2
When it applies
When the reported RVR is not available, or the approach's minimum RVR is more than the most the aerodrome assesses; not for take-off minima or to continue an approach in low-visibility operations.
Rules as of
AMC10 CAT.OP.MPA.110, Table 16 (ED Decision 2022/012/R), rules as of 2026-10-20

Review: Not yet independently reviewed by a flight instructor (CFI).

Last verified: 2026-11-07, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Checked against: 23 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Sources

Terms

CMV: converted meteorological visibility
Under EASA rules, a value that stands in for runway visual range when the RVR is not reported: the reported visibility multiplied by a factor that depends on the lights in use and day or night. Source: Easy Access Rules for Air Operations (Regulation (EU) No 965/2012)

Experimental means this tool has not yet met the stable bar: at least 20 golden vectors, differential tests, and an independent worked example.

CMV — converted meteorological visibility

Under EASA rules, a value that stands in for runway visual range when the RVR is not reported: the reported visibility multiplied by a factor that depends on the lights in use and day or night.

Source: Easy Access Rules for Air Operations (Regulation (EU) No 965/2012)