geoprimsField-grade geospatial math

Height per hectopascal and per inch of mercury

How much height one hectopascal and one inch of mercury of pressure span at a pressure altitude, from the standard atmosphere, with the 27 ft per hPa and 1,000 ft per inHg rules of thumb beside it.

Planning and education aid. Not for primary navigation. Full disclaimer

27.31ft

At 0 ft, 1 hPa of pressure spans 27.31 ft of height and 1 inHg spans 924.8 ft.

The 27 ft per hPa rule of thumb is 0.3 ft short here.

Height for 1 inHg
Pressure here
Temperature used
27 ft per hPa rule, off by
Provenance
Computed by
aviation.altimetry.pressure-per-height 1.0.0, core 0.1.0
Model
Hydrostatic pressure-height relation dh/dp = R·T/(g₀·p) in the ICAO Standard Atmosphere, with the given temperature in place of ISA when there is one
Accuracy
Exact for the standard atmosphere's hydrostatic relation; the real column departs from it with weather
Notes
None
Cites
International Civil Aviation Organization, Manual of the ICAO Standard Atmosphere (extended to 80 kilometres (262 500 feet)); Federal Aviation Administration, Pilot's Handbook of Aeronautical Knowledge, FAA-H-8083-25C

Something look off?

Your values

Showing an example. Change anything.
Run many at once from a CSV

Loading…

How we got thisFormula, worked example, sources, and proof

Model: Hydrostatic pressure-height relation dh/dp = R·T/(g₀·p) in the ICAO Standard Atmosphere, with the given temperature in place of ISA when there is one

Accuracy: Exact for the standard atmosphere's hydrostatic relation; the real column departs from it with weather

When to use this: Use this to turn a pressure difference into height: how far an altimeter reads off when its setting is wrong by a few hectopascals, how much a QNH change moves your indicated altitude, or how tall a pressure layer is. The 27 ft per hPa and 1,000 ft per inHg rules hold near sea level; this gives the real figure at any altitude, and the rule's error beside it.

Limitations: The answer is the height per unit of pressure right at this altitude; over a big pressure change the figure itself changes, so a large altimeter error is better worked as two pressure altitudes. It uses the standard atmosphere's pressure for the pressure altitude and only lets the temperature differ, which is how real columns mostly differ; it does not model humidity, which can add about 1% in warm, humid air.

Worked example: Sea level on a standard day. Source: add-aviation-suite altimetry scenario: 27.31 ft (8.324 m) per hPa and 924.8 ft per inHg, against the ambiance package's independent ICAO atmosphere. It is golden test vector v001, and every build checks the tool still gives its answer within its tolerance.

You enter

Pressure altitude
0 ft

You get

Height for 1 hPa
27.31 ft
Height for 1 inHg
924.8 ft
Pressure here
1,013.25 hPa
Temperature used
15 °C
27 ft per hPa rule, off by
-0.3 ft

Review: Not yet independently reviewed by a flight instructor (CFI).

Last verified: 2026-09-18, when a maintainer last confirmed this tool's sources at the issuer. See the sources ledger.

Status: version 1.0.0, core 0.1.0. See this tool in the verification report.

Changes

Checked against: 22 golden test vectors (download the test vectors, each with its source and tolerance). See how results are checked and every source.

Constants this tool assumes

Values you do not enter, and where each comes from.

Gas constant for dry air R
287.05287 J/(kg K) — Manual of the ICAO Standard Atmosphere (Doc 7488)
Standard gravity g0
9.80665 m/s2 — Manual of the ICAO Standard Atmosphere (Doc 7488)

Sources